1-to-2 Lavalier Wireless Microphone System | USB & 3.5mm Output

1. Product Features

2. Driver-free, plug and play.

3. Supports condenser microphone pickup, wireless audio dynamic range greater than 98dB.

4. The microphone requires only 2 AA batteries, and the receiver can be directly plugged into the PC USB port for use (5V500mA).

5. Strong compatibility, supports standard USB connection to PC, compatible with Android system, WINDOWS-ALL system, LINUX system, and Apple system.

6. Multi-channel output, supports USB driver-free output, and also supports 3.5mm analog signal output. Can be connected to mixers, amplifiers, etc.

7. Supports LCD display, showing signal strength, battery level, connected frequency points, etc.

8. Supports up to 100 test microphones working simultaneously without interference.

9. Supports manual frequency adjustment, with frequency points between 640MHz and 690MHz.

10. Supports 10 groups of frequency point polling switching, 10 per group, a total of 100 frequency points.

11. Supports simultaneous wireless connection of handheld microphones, gooseneck microphones, and lavalier microphones.

12. Compact design, eye-catching.

13. Simple yet not simplistic, stylish and elegant appearance, with exquisite details showing true quality.

14. Product Parameters

15. Receiver: (Mobile editing host connection)

16. Frequency range: 640MHz ~ 690MHz

17. Bandwidth: 50MHz

18. Maximum number of channels: 200

19. Receiving sensitivity: <= -105dBm

20. Signal-to-noise ratio: >= 80dB

21. Frequency response: 30Hz ~ 15KHz

22. Audio output level: 350 mV

23. Distortion THD+N: <0.5%

24. Delay time: <3ms

25. Power: USB 5V/150mA

26. Operating temperature: -25°C to 60°C

27. Transmitter: (Portable mobile)

28. Frequency range: 640MHz ~ 690MHz

29. Sensitivity: Microphone -30dB ±3dB (0dB=1V/Pa at 1KHz)

30. Microphone capsule type: Condenser capsule pickup

31. Signal-to-noise ratio: >= 74dB

32. Frequency response: 65Hz ~ 18kHz

33. Transmit power: 16~25dBm

34. Distortion THD+N: <0.5%

35. Effective distance: > 40m

36. Delay time: <5ms

37. Operating temperature: -25°C to 60°C

38. Power: 2 AA batteries

39. Operating current: 200mA@3V

40. Operating time: 12 hours

41. Packaging dimensions: 23*17*4.5 cm

Instructions:

I. Connect to PC:

42. Plug the USB end of the USB receiver into the USB port on the PC. The LED on the USB receiver will flash for 1 second and then go off.

43. Turn on the power switch of the main unit. The main unit and the USB receiver will automatically connect, and the adapter's LED will stay on.

II. Connect to mixer/analog input interface:

44. Plug the USB receiver into a USB power supply interface. The LED on the USB receiver will flash for 1 second and then go off.

45. Use a 3.5mm audio cable: insert one end into the 3.5mm jack at the rear of the USB receiver, and the other end into the 3.5mm analog signal input interface of the mixer.

46. (If the target device's interface is XLR, Phoenix terminal, RCA, etc., a corresponding adapter cable is required.)

47. Turn on the power switch of the main unit. The main unit and the USB receiver will automatically connect, and the adapter's LED will stay on.